|
Search |
|
|
|
|||||||
|
|||||||
|
|
||||||
|
|||||||
|
|
|
||||||
|
|||||||
|
|||||||
|
|||||||
|
Home » Electrostatic Precipitators » Replacement Parts » Flakt » Flakt HV system » Flakt HV electrodes » Button style electrode |
Electrostatic Precipitator Replacement Parts
|
|
Button-style spring electrode
11002-X-L-MWhere:X = the number of turns in the spring (see drawing below) L = the length of one of the ends of the spring (see drawing below) M = the material of construction For example a spring electrode with 54 turns, end lengths of 117mm and made from 904L stainless steel would have the part number 11002-54-117-904L. The equivalent Flakt part numbers would typically be AS-33294 followed by a two digit number. |
||||||||||||||||
|
||||||||||||||||
| If you are unsure of the dimensions of your electrode the second method is to measure the distance of the electrode in the stretched state - i.e. the distance between the connection points on the frame members for each electrode. For assistance please contact one of our engineers. | ||||||||||||||||
|
||||||||||||||||
This is a less common style of Flakt spring electrode. It
consists of a spiral wound spring with tapered button ends as per the
following drawing and photos. Our part number for this
electrode is:
|
Site last updated 29th April 2005 ©2005 Total Air Pollution Control Pty Ltd. All Rights Reserved. Unauthorised copying and reuse of any content in any form is strictly prohibited. Use of this Web site constitutes acceptance of the TAPC User Agreement and Privacy Policy. |