BHA has developed a variety of door seals that prevent leakage of outside air into your air pollution control equipment.

If doors are sealed improperly, they can cause many problems within your air pollution control equipment, including:

• Corrosion of doors and walls
• Fugitive emissions
• Production losses
• Reduction of airflow across filters because of condensation and blinding
• Maintenance problems

• FDA Approved sponge neopreme and silicone door seal
• Silicone RTV adhesive for installing door seal. This adhesive is effective up to 204°C. When ordering, estimate one tube per 6m of door seal.

3/4 in x 1 in
(1.9 cm x 2.54 cm)

5/8 in x 7/8 in
(1.59 cm x 2.22 cm)

232°C

Excellent high temp.

General resistance to oxidizing chemicals, ozone and alkalies

Poor resistance to solvents, oils, concentrated acids and abrasion

3/16 in x 1/2 in
(.48 cm x 1.27 cm)

3/8 in x 1 in
(.95 cm x 2.54 cm)

232°C

3/16 in x 1/2 in
(.48 cm x 1.27 cm)

3/8 in x 1 in
(.95 cm x 2.54 cm)

121°C

Good resistance, abrasion resistant

Moderate chemical resistance

Generally effected by strong oxidizing acids

1/2 in (1.27 cm) Bulb

1 in (2.54 cm) Bulb

Excellent high temp.

General resistance to oxidizing chemicals, ozone and alkalies

Poor resistance to solvents, oils, concentrated acids and abrasion

1/2 in (1.27 cm) Bulb

1 in (2.54 cm) Bulb

1/2 in (1.27 cm) Bulb

1 in (2.54 cm) Bulb

3/4 in (1.9 cm) square,
128 ft (39.01 m) per roll

1 in (2.54 cm) square,
86 ft (26.21 m) per roll

Excellent high temp.

Good resistance to most acids, alkalies and solvents

Abrasion resistance

Superb tensile strength