|
|
|
|
|
|
Call us TOLL FREE
1800 424 269
(within Australia)
+61-2-4268 6400
(outside Australia)
|
|
|
|
|
|
|
|
|
|
|
| Exclusive Australasian Agents for: |
|
| Exclusively selling equipment by: |
|
| Proud members of: |
 |
The Air Pollution Control
Equipment Manufacturers
Association of
Australia |
|
|
|
| Filter
bags for Reverse Air or Shaker designs |
| In
baghouses using reverse air or shaker cleaning systems, particles
are collected on the inside surface of the bag. The dust laden gas
enters through the dirty side (inlet) of the collector and flows up
through the bag. The particles are filtered by the dustcake and the
fabric, and clean air exits through the outside of the bag. |
| |
- Grommet
Top
(#1)
- Loop
Top (#2)
- TRAP
bags have a strap or loop top with a torsion spring sewn
into the top. (#3)
- Strap
Top (#4)
- Envelope
Style (#5)
- Cord
Top Cuffs (#6)
- Compression
Band (#7 - shown with cap installed)
|
Accurate
shaker & reverse air top designs are
essential for proper installation.
|
Shaker
and Reverse Air Anti-Collapse Rings
Anti-Collapse
Rings are metal rings of various wire gauges, metals, and platings
sewn to the outside of the bag body to prevent the bag from collapsing
during cleaning.
Shaker
and Reverse Air Bag Bottom Designs
- Sewn
Flat
bags are sewn straight across to prevent raveling. (#1)
- Snapband
Cuffs with flat gaskets for cast or recessed collar
style tubesheets. (#2)
- Cord
Cuffs have a firm cord sewn into a hem or cuff and are
used when the bag is clamped to a thimble. (#3)
- Compression
Band bottom cuffs have a riveted stainless band sewn
in the cuff to fit clampless thimbles. (#5)
- Snapband
Cuffs with double-beaded grooved gaskets fit flat plate
tubesheets. (#6)
|
Shaker,
reverse air and pulse-jet bag bottom
designs vary by cleaning system
& equipment manufacturer.
|
|
|
|
